Philippines specifications · checked 2026-08-25
Honda Click 150i specifications
Engine, power, torque, dimensions, seat height, weight, fuel capacity, tire sizes and braking data for the Honda Click 150i. The figures below use the same source-backed model record as the main motorcycle guide.
Technical data
Honda Click 150i specs table
Use the complete specification, not one number in isolation, when comparing fit, performance or replacement parts.
Engine displacement150 cc
Maximum power13 hp
Maximum torque13.4 Nm
TransmissionAutomatic
Curb weight113 kg
Seat height769 mm
Fuel tank5.5 L
Fuel economy52 km/L · published
Ground clearance132 mm
Front tire90/80-14
Rear tire100/80-14
Brakes / ABSCombined Braking System (CBS); no ABS asserted for this generation
Generation2018–2022 generation
CategoryCommuter scooter
How to read the numbers
What matters beyond engine displacement
Seat height + weight
A low seat can help at a stop, but curb weight, seat width and suspension sag also affect low-speed confidence.
Power + torque
Peak output does not describe the whole riding experience. Gearing, throttle response, rider aids and where the torque arrives also matter.
Tires + brakes
Match the full tire specification and confirm the exact ABS/braking equipment on the Philippine-market model or variant.
Specification source
Honda Philippines 2018 Click150i launch reference; archived Philippine road-test specifications cross-check
Open specification source ↗Record checked 2026-08-25. Manufacturers can revise specifications and equipment by model year or market.Cross-shop
Similar commuter scooter motorcycles
Compare nearby alternatives using the same core specification fields.
124 cc9.4 hp760 mm seat
Photo pending · open model research →
Honda Click 125i
₱81,900
Philippine comparison site · checked 2026-08-25125 cc11 hp769 mm seatAutomaticCurrent model
Yamaha Mio Gear
₱79,400–₱82,400
Philippine comparison site · checked 2026-08-25125 cc9.3 hp750 mm seatAutomaticCurrent model
Honda Click 150i specifications FAQ
What is the engine size of the Honda Click 150i?
The Honda Click 150i has a 150 cc engine producing 13 hp and 13.4 Nm of torque.
What is the seat height of the Honda Click 150i?
Seat height is 769 mm. Actual ground reach also depends on your inseam, seat width, suspension sag and footwear.
How much does the Honda Click 150i weigh?
Curb weight is 113 kg. Check the exact model year if your motorcycle or local specification differs.
What tire sizes does the Honda Click 150i use?
It uses 90/80-14 at the front and 100/80-14 at the rear. Match the full size, load rating, speed rating and front/rear application when buying replacements.